Télécharger Imprimer la page

Saris Bones Hitch 882 Mode D'emploi page 16

Masquer les pouces Voir aussi pour Bones Hitch 882:

Publicité

Les langues disponibles

Les langues disponibles

Replace any mounting strap at the first sign of wear. Replacement parts are available through your local Saris dealer or call 1-800-783-7257.
Tighten straps regularly during the journey.
Vehicle should be in good condition in the area at which the hitch is located.
Do not exceed maximum load capacity of carrier (120 lbs max or 60 lbs max per bike!) Secure properly and adjust for even load distribution, loading the heaviest/biggest
bike first and closest to the vehicle.
Saris absolves itself of responsibility for any personal injuries or consequential damage to property or wealth caused by incorrect fitting or use.
Recommended Rack Maintenance & Care Instructions
Each use:
Wipe down trunk rack feet
Avoid ground contact with trunk rack feet
Check straps for signs of wear
Check bike cradles and wheel scoops
Check for loose bolts
Every 90 days actions:
Clean with water and mild soap
Lubricate locks if applicable (use wet, oil-based lubricant; NO WD-40)
Grease hitch bolt threads
Check for scratches in paint.
Official Warranty Terms: Saris Racks
Saris Cycling Group, Inc (SCG), parent company of Saris Racks, warrants our products to the original consumer to be free from defects in materials and workmanship. Your purchase
includes the following warranty which is in lieu of all other express warranties. This warranty is extended only to the initial consumer purchaser. This warranty gives you specific legal
16

Publicité

loading

Ce manuel est également adapté pour:

Bones hitch 883Bones hitch 884