Media Player Quick Start; Upnp Servers; Setting Up Upnp Server In Pc; Play Media Files Using Upnp Server - Rotel RDG-1520 Manuel De L'utilisateur

English

Media Player Quick Start

The Media Player feature allows you to play audio files (AAC, AIFF,
AU, FLAC (CD quality 16 bit) , MP3,WAV and WMA (except lossless))
and playlists (M3U) created by your computer's Media Player, such as
Window Media Player 11. It has been verified to work on Windows
2000, Windows XP and Windows Vista.
Note: File sharing may need to be enabled on your computer, and not
all Media Players will allow sharing of music files. Please refer to your
computer's manual for instructions.

UPnP Servers

Setting up UPnP Server in PC

1. Use Windows Media Player 11(or 12 if you use Windows 7)to setup
the PC as an UPnP Sever, click the 'Library' tab from Windows Media
Player 11 and select 'Media Sharing' to open the 'Media Sharing'
window to set the option.
2. Your PC will now prompt you that a device has attempted to connect
to your UPnP server. Please click Allow button.
Note: As of this writing, Windows Media Player 11 does not support
AAC decoding used by Apple as the default selection in iTunes. We
recommend that you change the default import setting to WAV, AIFF,
or MP3 formats for maximum compatibility across many devices. You
can set Windows Media Player to mirror your iTunes folders. Windows
Media Player 12 (for Windows 7) does support AAC.
3. Go into 'Media Player' menu, and select 'UPnP Servers' sub menu by
turning and pressing the knob, The unit will scan for all available UPnP
servers. It will display '[Empty]' if no UPnP servers are found.
Internet Radio
< Media Player >
FM
DAB
Play media files using UPnP Server.
1. After a successful scan, select your UPnP server by rotating the knob
if there is more than one UPnP server, highlight, then press the knob to
select the desired server.
2. RDG-1520 will list the options or folders available. This varies depending
on the setup of your music server, and version of software you are using.
It will typically show the following menus.
<All Music >
All Artists
Albums
Music Playlists
Folders
[Search]
You can search for songs by scrolling through the All Music option or
search for specific artists using All Artists or specific albums using Albums.
In each case, you can drill down to the song level.
Enter [Search] function and the following menu will be displayed.
Then enter either Artists, Album or Music sub menus. You can enter a
< Artists >
Album
Music
letter or letters the Artist/Album/Music starts with. Example, enter "M" in
Artists, then press REPLY key to start searching. All artists in your library
starting with the letter "M" will be returned.
3. Once the desired track is found, push the knob to select. The selected
track will be displayed on the menu as the unit attempts to connect to the
music server. The information displayed on the Rotel unit depends on the
information contained in the track, it will typically show the following.
"Album/Artist Name"
"Track title"
00:50
309kbps WMA
11
< UPnP Servers >
Playback Mode
Queue