Playback
Listening to a record
Here's how to play back a record.
Starting playback
CAUTION
If you play back a record without sufficiently lowering the volume of your
amplifier, a loud sound might occur when the tip of the stylus contacts the
record. This can cause hearing loss and might damage your amplifier and
speaker, so be sure to lower the volume of your amplifier.
If you are playing a record and the sound is being output from the LINE
OUT jacks, the platter will stop when you switch the source from PHONO
to network or Bluetooth.
NOTE
MusicCast CONTROLLER cannot start/stop record playback or switch the
speed.
1
Open the dust cover, and place the record on the platter.
If you're playing a 45 rpm record, use the included 45 rpm adaptor.
25
En