Hilti NURON SJT 6-22 Mode D'emploi Original page 14

Status
Position 2
Position 3
3.8 Anti-splinter insert
The product can be equipped with an anti-splinter insert.
The anti-splinter insert helps prevent splintering on the surface of wood materials when cutting.
3.9 Automatic product switch-off
If the on/off switch is pressed continuously for longer than 15 minutes (e.g. during transport or storage), the
product switches itself off automatically. This prevents deep discharge of the battery.
3.10 Items supplied
Orbital-action jig saw with saw blade, guard, dust removal adapter, anti-splinter insert, operating instructions,
hex key.
Other system products approved for use with this product can be found at your local Hilti Store or online at:
www.hilti.group
4 Technical data
4.1 Orbital-action jig saw
Rated voltage
Weight without battery
Stroke length
Stroke rate under no load (n
Maximum cutting performance in wood
Maximum cutting performance in aluminum
Maximum cutting performance in unalloyed steel
Cutting angle (left/right)
Suction adapter outside diameter
Storage temperature
Ambient temperature for operation
4.2 Battery
Battery operating voltage
Weight, battery
Ambient temperature for operation
8 English
Meaning
Medium orbital action
High orbital action
)
0
SJT 6-22
21.6 V
2.1 kg
(4.6 lb)
28 mm
(1.1 in)
800 /min ... 3,000 /min
150 mm
(5.9 in)
25 mm
(1.0 in)
10 mm
(0.4 in)
0° ... 45°
27.5 mm
(1.08 in)
−20 ℃ ... 70 ℃
(−4 ℉ ... 158 ℉)
−17 ℃ ... 60 ℃
(1 ℉ ... 140 ℉)
21.6 V
See the end of these
operating instructions
−17 ℃ ... 60 ℃
(1 ℉ ... 140 ℉)
2264219
*2264219*