Technical Specifications; Scope Of Delivery; Dimensions; Install The Electrical T-Distributor - Franke 2030021142 AT3O0051 Notice De Montage Et De Mise En Service

6.

Technical specifications

Operating voltage:
Power consumption:
Communication:
Protection class:
7.

Scope of delivery

Quantity
1
1
2
2
1
1
1
1
8.

Dimensions

9.

Install the electrical T-distributor

☞
Important!
The components of the electrical T-distributor may only be installed after the power
has been switched off.
☞
For system cable recommendations, see
When using cables other than the system cable, pay attention to the different colour
code. The outer diameter must not exceed 7.5 mm.
9.1 Remove the sheathing (a) of the system cable (approx. 40 mm).
9.2 Push the cap nut (c) onto the system cable (b) up to the limit stop.
24 VDC
4 W
Ethernet via ECC function controller
IP 68
Name
Motor
Electronic module
Pressure cap
Electrical T-distributor
Adapter cable
Safety cap
Cover plate
Installation and operating instructions
Chapter 12., Accessories.
5