•
The motor unit and the blade adapters are not suitable for cleaning in a dishwasher!
•
When cleaning, do not use any corrosive or abrasive cleaners. They could damage
the surface.
•
A gasket is located in the blade adapters (see chapter "Device overview"). This
gasket ensures that the blending container does not leak while processing
food. Make sure the gasket is still in the correct position after each cleaning.
•
Clean the blending containers and the lids with clean, warm water and a
small amount of mild detergent or in the dishwasher.
•
Clean the blade adapters with clean, warm water and a small amount of
mild detergent.
•
Wipe off the motor unit with a damp cloth and dry it thoroughly afterwards.
•
Allow all parts to dry completely before reassembling and/or stowing the
device. Store the device in a clean, dry area that is not accessible to children.
Troubleshooting
If the device is not working properly, please check whether you are able to rectify the
problem yourself fi rst. Otherwise contact customer service.
Do not attempt to repair a defective device yourself!
Problem
Possible cause/solution
•
•
The device is
•
not working.
•
Disposal
The packaging material is recyclable. Dispose of the packaging in an
environmentally-friendly manner and make it available to the collection service
for recyclable materials.
Dispose of the device in an environmentally-friendly manner. It does not belong
in the household garbage. Dispose of it at a recycling centre for electrical and
electronic devices. For more information, please contact the administration in
your community.
Customer Service / Importer:
DS Produkte GmbH, Am Heisterbusch 1, 19258 Gallin, Germany
Tel.: +49 38851 314650
(Calls to German landlines are subject to charges. The cost varies depending on the
service provider.)
04505_de-gb-fr-nl_V4.indb 19
04505_de-gb-fr-nl_V4.indb 19
19
Is the mains plug properly connected with the socket?
Is the socket defective? Try another socket.
Check the fuse for your mains connection.
Has the blending container been mounted on the motor unit? The
device can only be activated if the container has been properly
placed on the motor unit and has locked in place.
EN
All rights reserved.
23.07.2015 14:04:59
23.07.2015 14:04:59