Velleman VTSSC20N Mode D'emploi page 3

VTSSC20N – SOLDERING STATION CERAMIC HEATER
1. Introduction & Description
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm
the environment.
Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialized
company for recycling.
This device should be returned to your distributor or to a local recycling service.
Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for buying the VTSSC20N! Please read the manual carefully before bringing this device into service. This
soldering station is temperature-controlled: sophisticated circuitry regulates the temperature between 150°C and
420°C.
The VTSSC20N is a 48W soldering station with a temperature sensor in the ceramic heating element. The heating
element is supplied with the necessary power via a safe 24V transformer, while the bit is completely isolated from the
mains. The control circuitry ensures that devices sensitive to static charges cannot be damaged during the soldering
process. The included bit consists of a copper core that is protected by a steel coating.
1. ON/OFF switch
2. temperature control
3. sponge
4. iron stand
5. fuse holder
6. earth connection
7. temperature read-out
The dimensions of the device are 120 x 170 x 90mm, it weighs 1.75kg and the temperature range is 150 – 420°C.
VTSSC20N_v2
8. rubber cable
9. handle
10. antiskid rubber
11. heating element with incorporated temperature sensor
12. bit
13. bit holder
3 VELLEMAN