ADURO 9.7 Mode D'emploi page 32

1.1 Compliance
Aduro 9.7 complies with the EN13240 European standard as well as the NS3058 Norwegian standard and is
thereby approved for installation and use in Europe. At the same time, the manufacturing process is subject
to external quality control. DoP (Declaration of Performance) can be downloaded at
www.adurofire.com/download.
1.2 Technical data
Aduro 9.7
Nominal power
Flue outlet, diameter
Measurements (HxWxD)
Height exhaust branch above floor
Distance from floor to centre of rear outlet
Distance from centre of exhaust branch to rear edge of
stove
Weight
Material
Fuel
Max wood length
Convection stove
Primary, secondary, and tertiary air supply
Air-wash system
Ashpan
Energy efficiency
Energy efficiency index
Energy efficiency class
Chimney draft
Maximum combustion amount per hour (wood)
Heat rating in buildings with
- Optimum insulation
- Average insulation
- Inadequate insulation
1.3 Transportation
When taking your wood burning stove home, please ensure that it travels in an upright position. If you wish
to lay it flat, it is important that you remove all loose parts from the combustion chamber (cast iron grate,
baffle plates and loose fireproof tiles) and remove the ashpan. Please use wood from the packaging for the
first use. The plastic packaging should be discarded.
1. General
Data
6.0 kW
Ø15 cm top/rear
150 x 50 x 44.7 cm
119.7 cm
137 cm
19.3 cm
169.2 kg
Sheet iron
Wood and wood briquettes
39 cm
81.3 %
108.9
A+
12 Pa
Ca. 3.1 kg
2
150 m
2
100 m
60 m 2
32