ADURO 9 Lux Beton Mode D'emploi page 32

Aduro 9 Lux Beton is mounted with a beton stone cover. The stones are mounted when the stove is placed
at its final position. See page 95-97 for mounting instructions. It is important to use clean gloves when
dealing with the stones.
You are welcome to install your wood burning stove yourself – but we strongly recommend that you consult
your chimney sweep before you begin the installation. It is important to ensure that all local rules and
regulations, including ones relating to national and European standards, are complied with when installing
this device. Your dealer can also provide you with installation advice. Remember, it is your responsibility that
rules in force are complied with.
You may not begin to use the stove until it has been inspected and approved
by your local chimney sweep.
3.1 Position of the stove / distance requirements
The wood burning stove must be installed in a suitable and physically possible position. You need to be sure
that the position complies with local regulations. Distance requirements will only apply if the wood burning
stove is to be placed close to flammable materials:
Distance to flammable material (see illustration below)
Behind the Behind stove with
stove insulated flue pipe
15 cm
2. Mounting of the stone cover
3. Installation of the stove
To the sides
10 cm 45 cm
Above the Corner
arrangement
stove
75 cm 20 cm
Distance to
furniture
90 cm
32