Introduction; Connections, Control, And Display Elements - Cameo PHANTOM F3 Manuel D'utilisation

INTRODUCTION

FOG MACHINE
CLPHANTOMF3
CONTROL FUNCTIONS
Cable remote control
RF remote control
PROPERTIES
Fog machine for water-based fog fluid. Includes cable remote control and RF remote control.
Operating voltage: 230 V AC / 50 Hz. 970 W power consumption.

CONNECTIONS, CONTROL, AND DISPLAY ELEMENTS

HEAT
READY
3
4
REMOTE
2
FUSE
F5AL / 250 V
POWER IN : AC 230 V 50 Hz
POWER CONSUMPTION: 970 W
WEIGHT: 4.4 Kg
1
POWER IN
1
BLACK
Permanently connected power cable with CEE 7/7 power plug.
PANTONE 429 C
2 FUSE
Fuse holder for 5 x 20 mm micro fuses. IMPORTANT NOTE: Replace the fuse only with a fuse of the same type and values (see inscription on
housing). If a fuse trips repeatedly, please contact an authorized service center.
3 REMOTE
Female 5-pin DIN socket for connecting the cable remote control and the RF remote control radio receiver (included).
HEAT/READY
4
Indicator LEDs to signal the operating status. When the red HEAT LED is lit, the fog machine is in the heat-up phase. Once the green READY
LED lights up, the fog machine is ready for use.
WINDOW
5
Window for checking the canister level. The canister is illuminated for easier level monitoring.
5
Cameo® is a registered brand of the Adam Hall Group
Adam-Hall-Str. 1 · 61267 Neu-Anspach · Germany
DESIGNED AND ENGINEERED IN GERMANY. Assembled in PRC
PHANTOM F3
8
7
BLACK
PANTONE 429 C
6
8
5