Fix Installation - Diono monterey 2 CXT Mode D'emploi

FIX INSTALLATION

To improve safety and performance, this booster seat is equipped
with a unique FIX system that allows easy attachment to a vehicle's
lower anchor locations.
WARNING: Unsecured objects can become flying hazards and can cause
serious injury in an accident. Diono always recommends utilizing FIX instal-
lation in vehicles equipped with lower anchors.
Disengage FIX connectors from storage slots and
lay booster seat on its side.
1. While depressing the cam lock lever, pull FIX
connectors away from the booster seat and
extend both straps all the way.
2. Attach both FIX connectors to the vehicle
starting with the connector that is furthest from
you. For ease of use, make sure open end of
hooks face upward during use.
3. While pushing booster against vehicle seat,
pull one adjuster strap tight and then the other.
10
01827 310557
NOTE:
still have movement against the vehicle seat back and bottom.
DISENGAGING FIX INSTALLATION
Follow above instructions in reverse:
1. Depress the cam lock lever while pulling child seat away from the
vehicle seat back until the FIX straps are extended all the way.
2. Disconnect FIX connectors from vehicle anchors.
1
3. Pull FIX adjuster straps to recess the FIX connectors into the back
of the booster seat bottom for safe storage.
2
3
Even with FIX properly attached and adjusted, booster seat will
diono.com
FIX INSTALLATION
11