Technical Data - Husqvarna 333R Manuel D'utilisation

Technical data

Technical data
Engine
Cylinder displacement, cu.in/cm
Cylinder bore, inch/mm
Stroke, inch/mm
Idle speed, rpm
Recommended max. fast idle speed, rpm
Speed of output shaft, rpm
Max. engine output, acc. to ISO 8893, kW/ rpm
Catalytic converter muffler
Speed-regulated ignition system
Ignition system
Manufacturer/type of ignition system
Spark plug
Electrode gap, inch/mm
Fuel and lubrication system
Manufacturer/type of carburetor
Fuel tank capacity, US pint/litre
Weight
Weight without fuel, cutting attachment and guard,
Lbs/kg
Sound levels
(see note 1)
Equivalent sound pressure level at the user's ear,
measured according to ANSI B175.3-1997, dB(A),
min/max:
Vibration levels
Vibration levels at handles, measured according to
ANSI B175.3-1997, m/s
At idle, left/right handles, min.:
At idle, left/right handles, max.:
At max. speed, left/right handles, min.:
At max. speed, left/right handles, max.:
Note 1: Equivalent noise pressure level is calculated as the time-weighted energy total for noise pressure levels under
various working conditions with the following time distribution: 1/2 idle and 1/2 max. speed.
NOTE! Noise pressure at the user's ear and vibration on the handles are measured with all the machine's approved
cutting equipment fitted. The table indicates the highest and lowest values.
68 – English
TECHNICAL DATA
3
2
333R 335FR
2,11/34,6 2,11/34,6
1,50/38,0 1,50/38,0
1,20/30,5 1,20/30,5
2900 2900
11500 11500
8220 8220
1,6/8400 1,6/8400
Yes Yes
Yes Yes
Walbro MB Walbro MB
Champion RCJ 6Y Champion RCJ 6Y Champion RCJ 6Y
0,02/0,5 0,02/0,5
Zama C1Q Zama C1Q
1,27/0,6 1,27/0,6
13,4/6,1 13,4/6,1
96/102 95/102
3,0/2,8 2,1/2,0
3,2/3,1 2,1/2,0
2,9/3,4 2,7/3,2
4,2/5,1 2,9/3,8
335RX
2,11/34,6
1,50/38,0
1,20/30,5
2900
11500
8220
1,6/8400
Yes
Yes
Walbro MB
0,02/0,5
Zama C1Q
1,27/0,6
13,7/6,2
95/102
2,0/1,9
2,7/2,3
2,4/1,8
2,7/2,7