E L E C T R O M A G N E T I C C O M P A T I B I L I T Y; E M C; Summary Of Test For Electromagnetic Compatibility - Ardo Master Mode D'emploi

8 . E
L E C T R O M A G N E T I C

8.1 Summary of test for Electromagnetic Compatibility

Further information about the EMC test can be found in the Service Instructions.
The test of electromagnetic compatibility according to IEC/EN 60601-1-2 for this device has shown
that in the intended use no endangering of the functional safety or a failure of this device due to
electromagnetic influences are expected.
This device uses HF-energy exclusively for its internal function.
Its HF-transmission is therefore very small, and it is therefore unlikely that adjacent electronic equipment
will be affected.
Since the propagation of electromagnetic variables is affected by absorptions and reflections from
structures and/or by objects and people, the following must be observed:
This device should not be operated close to other devices.
Do not place any other
If it must operate close to other devices, the device should be observed
to verify its intended performance.
If abnormal performance is observed, additional measures may be necessary,
such as re-orienting or relocating the device.
Mobile radio equipment or mobile phones should not be used
close to this device or its mains power cable.
Interference may occur in the vicinity of equipment marked with the adjacent symbol.
Ardo medical AG
C
O M P A T I B I L I T Y
devices on the housing of this device.
18
( )

E M C

Operating Instructions
Master and Senator
Subject to modifications