Trolley - Ardo Master Mode D'emploi

4.4 Trolley

Trolley is optionally available
To mount the device on the trolley, unscrew the four
Screw the device to the mounting plate with the screws from the four rubber feet;
ensure that the front of the device matches the position of the castors with the brakes.
Ventilation of the device without rubber feet is only ensured on the trolley.
If the device is removed from the trolley, the rubber feet must be re-attached
to the bottom of the housing to ensure ventilation.
1
2
3
5 4
6
7
7
2x Hex socket flat countersunk head screw M5x10
1
1x Mounting plate
2
3
1x Fitting rail
2x Hex socket head cap screw M6x10
4
2x Protection plug
5
2x Hex socket head cap screw M6x40
6
2x Castor with brake, antistatic
7
2x Castor without brake
8
Ardo medical AG
8
8'
rubber feet on the bottom of the housing.
7
12
7
Operating Instructions
Master and Senator
Subject to modifications