HSM Shredstar X8pro Notice D'utilisation page 7

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 11
1 Proper use, warranty
The shredder is designed exclusively for de-
stroying paper. Depending on the cutting type, it
can also handle small quantities of CDs, credit
and charge cards.
Its sturdy drive mechanism is not damaged by
paper clips and staples.
The warranty period for the document shredder
is 2 years. This warranty and guarantee exclude
wear and damage caused by improper handling
or actions taken by third parties.
2 Safety instructions
• Read the operating instructions before
switching on the document shredder. Save
these instructions for later use.
• Observe all safety instructions on to the ma-
chine.
Risk of injury!
Do not reach into the paper feed
slot.
Risk of injury from being pulled
in!
Keep long hair, loose articles of
clothing, ties, scarves, jewellery,
etc. away from feed opening.
Material with the tendency to form
loops, e.g. tapes, strapping mate-
rial, etc. must not be shredded.
Keep the paper shredder out of
the reach of children. Do not let
the shredder run if the person us-
ing it is not present.
02/2011
Switch the shredder off and dis-
connect it from the mains if it is
damaged, not working correctly or
before relocating or cleaning it.
Service work may only be carried
out by HSM Customer Service or
by the service technicians of our
contractual partners.
• Make sure that the mains plug is easily ac-
cessible.
• Before you insert the mains plug, make sure
that the voltage and frequency of your power
supply comply with the information on the
name plate.
• Make sure that no liquid gets into the shred-
der.
• The shredder is for indoor use only and must
not be placed near a heater or other heat
source. The ventilation slots must not be
blocked or covered and they must be at a
distance of at least 2" (5 cm) away from walls
or furniture.
• If you detach the cutting head from the base
cabinet, please pay attention to the fl ap on
the bottom side of the cutting head.
7

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Shredstar

Table des Matières