INSTALLATION HEIGHT REQUIREMENTS
An access point to the hood from the ceiling or soffit must be made for
installation and future access to the range hood.
MIN. 24" OVER ELECTRIC/
MIN. 30" OVER GAS
PREPARING TO ATTACH THE CHIMNEY
The range hood attaches to the ceiling by a metal support structure (B on page
9). This support must be attached to the ceiling before the hood is attached.
This structure must be firmly attached to the ceiling.
FOR WOOD CEILINGS: Use four 4" long wood screws and washers.
FOR PLASTER OR SHEET ROCK CEILINGS:
If possible, the support must be attached to the ceiling joists. If not, a
supporting structure behind the sheet rock must be built.
8
Min.24"
Min.30"