Publicité
Les langues disponibles
Les langues disponibles
CAUTION:
•
Since this manual refers to international standards, we recommend to previously obtain information on local
safety regulations and to make sure they are observed.
•
Compressed air is a potentially powerful power source, therefore use extreme caution when using the
compressor or the accessory kit.
•
Using compressed air requires knowing and observing any applicable regulation.
•
Do not allow unattended use by non – experienced staff. Keep children and animals out of the work area.
•
Assume a stable position to properly make use of the tool and grip it firmly.
•
Accidental and unexpected tool movement may represent a serious hazard.
•
Do not employ the tools in premises that have a potentially explosive atmosphere, or where there are dust
deposits, gas pipelines or electric duct-lines.
•
Operate the tool in a suitably ventilated environment only.
•
Pay special attention for processed materials that are highly flammable or to their potential explosion.
•
Bear in mind that the poor consistency of the machined piece, or the poor quality of the accessories in use, may
cause the dangerous flinging of chips or fragments.
•
Be careful for possible sparks and machining slag.
•
Tools with rotary parts and their accessories may get entangled and twist rubberised or metal-reinforced gloves.
As such, be especially careful when using them.
GENERAL SAFETY REGULATIONS
•
Do not use the equipment without the required safety devices.
•
Never hold the tool from the compressed air hose when carrying it.
•
Do not let other people approach the work area.
•
Do not aim the air jet or the tool in your direction or towards any other third party.
•
By all means, avoid direct contact with the tool engaged immediately after having used it, as its surface may be
very hot.
•
Do not touch the equipment moving parts during its operation.
•
Do not open nor modify in any way the tool or its accessories. Any repair should be carried out only by trained
staff.
•
Read and understand the contents of this manual before installing, operating, repairing, maintaining, changing
accessories this tool.
•
Only qualified and trained operators should install, adjust or use the tool.
•
Connect compressed air only when the equipment is shut down.
•
For tool optimum performance, make sure hose and connection size are those required.
•
Before starting up the tool, check its connection and make sure the compressed air hose is not damaged.
•
Before connecting the hose to the tool please check, whether the hose and the quick coupler are clean. Do this
by letting air run freely through hose and quick coupler.
WHAT YOU SHOULD DO
16
EN
Publicité
