Trevi XF 1000KB Mode D'emploi Et Branchement page 7

ENGLISH XF 1000KB
TRANSPORTATION
Press the PUSH button present on the trolley handle, lift the handle up to lock (you will hear a metallic click). It's possible to adjust the height in two
positions. For transport, using the handle of the trolley, slightly bend the box and use the two rear wheels.
For unlocking and locking the trolley, press the PUSH button and fully lower the handle.
POWER
This unit works with rechargeable lead battery 12V 7.2Ah and mains supply 100-240V ~ 60/50Hz.
When the battery is low or the device does not turn on insert the power cord into the socket on the device (3) and the plug into a power outlet to
recharge, the CHARGE lamp (14) lights.
Status LED CHARGE:
- Led CHARGE RED fixed: the device is connected with the power cord and recharge the battery.
- Led CHARGE GREEN fixed: charging operation ended, the battery is full charged.
- Led CHARGE flashing RED: with the device in use, indicating that the battery is empty and it's nacessary recharging.
Do not connect the device to voltage other than that indicated.
BASIC FUNCTIONS
POWER ON/OFF
Press the POWER switch and turn it ON / OFF button to turn on / off the device.
NOTE: After about 15 minutes of inactivity, the unit automatically switches to standby mode.
To turn on the unit again, press the / / PAIR / STANDBY (23).
MODE SETTING FUNCTION
To change the operation mode, press more times the key FUNC. / LIGHT (25) to select USB (-1- on display) / AUX / BLUETOOTH (BT on display).
ADJUSTING THE VOLUME
1. Turn the volume VOL. (21) to increase or decrease the overall volume of playback.
2. Turn the VOL GUITAR (13) to adjust the volume of the signal at the GUITAR (10).
3. Turn the MIC VOL (16) to adjust the volume of the signal inputs MIC1 (9) and MIC2 (8). The adjustment works on the two inputs simultaneously
EQUALIZER
This unit has a built-in audio equalizer system. Use the adjustments in the board EQ OPERATION (5) to select a good setting for sound.
SETTING TONE TREBLE AND BASS
Turn the knob TREEBLE (19) to adjust the treble.
Turn the knob BASS (20) to adjust the bass.
ECHO EFFECT
Turn the knob ECHO (15) to increase or decrease the echo effect on the inputs MIC1 and MIC2.
Note: the echo only works on microphone inputs.
DISCO-LIGHT EFFECTS
To activate the effects Disco Light-long press the FUNC. / LIGHT (25). You can choose from eight different effects.
To cancel the effect Disco-Light, press and hold the FUNC. / LIGHT (25) more times until the display shows "OFF".
USB CHARGE
It's possible to use the USB CHARGE(7) slot for charging external USB devices.
Note1: not use this jack for playback of audio files from external devices (using the USB input, see chapter INPUT USB).
Note2: the recharging operations is possible only when the device is switched on.
INPUT USB
1. Press the FUNC. (25) on the unit and select "-1-".
2. Insert the USB memory into the USB port (26). Playback starts automatically.
3. To pause playback, press the / (23), the display shows the icon P .
4. To resume playback, press the button again (23).
/
5. Press the key: (22) while listening to go to the next track, while the 9 key (24) to the previous tracks.
6. Press and hold the button: (22) or 9 (24) while listening to quickly search a particular musical passage. Release the button to resume normal
playback.
NOTES
- The player may not support some USB devices, this is due to the incompatibility of some processors.
- To avoid harmful interference, always connect USB devices directly to the unit, do not use extension cords.
7