Bissell PET HAIR ERASER 1941 Série Guide Rapide page 13

Clean Inner Cyclone Separator
1
Maintain the Pet TurboEraser® Tool
1
3
To reassemble, align two clips on each end
of paddle wheel with belt on and pop back
into place.
Place brush roll with belt back in.
Faceplate will not close properly if all parts
are not aligned correctly.
2
2
Belt
Roller
Remove brush roll, belt, and paddle
wheel. Inspect for damages and replace
if necessary.
4
3
Tap separator against
inside of trash bin and
rinse under warm water if
necessary. Be sure to let
it completely dry before
placing back in Dirt
Container.
Paddle Wheel
www.BISSELL.com
13