VALBERG 970262 - WM 612 E W205T Consignes D'utilisation page 24

B
Useful information
Problem
Too much foam may have
formed and the automatic
The laundry remains wet at
foam absorption system
the end of the programme.
may have been activated
(*)
due to excessive use of
detergent.
(*) The machine does not go to the spinning phase when the laundry is not evenly
distributed in the drum to prevent damage to the machine and its environment. The laundry
must be spread out again inside the drum and spun again.
(**) The drum is not cleaned regularly. Clean the drum regularly. Refer to section 4.4.2
WARNING:
If you are unable to solve the problem despite following the instructions
in this section, contact the store or an authorised service agent. Never attempt to repair a
damaged unit yourself.
46
Cause Solution
• Use the recommended
amount of detergent.
EN
B
Useful information
47 EN