SilverCrest SDBE 2600 B1 Instructions D'utilisation Et Consignes De Sécurité page 16

Fer à repasser vapeur
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 21
instructions . Do not attempt to
modify the product in any way .
This product can be used by
 
children aged from 8 years and
above and persons with reduced
physical, sensory or mental
capabilities, or lack of experience
and knowledge if they have been
given supervision or instruction
concerning use of the product in
a safe way and understand the
hazards involved .
Children shall not play with the
 
product .
Cleaning and user maintenance
 
shall not be made by children
without supervision .
The product must not be left
 
unattended while it is connected
to the supply mains .
The plug must be removed from
 
the socket-outlet before the water
reservoir is filled with water .
The product must be used and
 
rested on a flat, stable surface .
The product is not to be used if
 
it has been dropped, if there are
visible signs of damage or if it is
leaking .
Ensure the rated voltage shown
 
on the rating label corresponds
with the voltage of the power
supply .
The product demands increased
 
energy consumption . Do not
connect any other devices
(e .g . heaters, air conditioners,
etc .) to the same circuit .
The use of extension cords is not
 
recommended . If the use of an
extension cord is necessary, it
must be designed for a current
flow of at least 10 A . Lay cords
in such a way that they may not
be tripped over or otherwise
damaged .
Do not operate any product with
 
a damaged power cord or plug,
when the product malfunctions
or has been damaged in any
manner .
Only use the product in dry
 
indoor rooms .
Do not operate the product with
 
wet hands or while standing on a
wet floor . Do not touch the power
plug with wet hands .
Protect the product against heat .
 
Do not place the product close to
open flames or heat sources such
as stoves or heating appliances .
Regularly check the power plug
 
and the supply cord for damages .
If the supply cord is damaged,
it must be replaced by the
manufacturer, its service agent
or similarly qualified persons in
order to avoid a hazard .
Protect the power cord against
 
damages . Do not let it hang over
sharp edges, do not squeeze or
bend it . Keep the power cord
GB/IE
17

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Hg04132aHg04132b

Table des Matières