Polaroid Lab Manuel D'utilisation page 10

Box
contents
01 Polaroid Lab
02 USB charging cable
03 Quick Start Guide
04 User Manual
How to use the
Polaroid Lab
1. Download the Polaroid App
on your phone
You will need the Polaroid Origilals App to
use the Polaroid Lab. The App also contains
Tips, Tricks & Tutorials, and Inspiration for
more ways to create.
→ polaroid.com/polaroidlab
2. Charge the Polaroid Lab
Important The Polaroid Lab will not be fully Important
charged upon purchase. Make sure that it is
fully charged before first use. To charge the
Polaroid Lab, plug the USB charging cable
into the Micro-USB slot on the Polaroid Lab's
back panel and the other end of the cable
into a charger, such as a phone adapter or
your computer's USB slot. The LEDs next to
the slot light up to show the current battery
level, four lit LEDs means fully charged. If the
Polaroid Lab is connected to a charger and
is fully charged then all charging LEDs will be
off. A full charge usually takes about 2 hours
through a wall socket with a phone adapter, or
up to 4 hours through a computer's USB slot.
A fully-charged Polaroid Lab will have enough
power to shoot 100 packs of film, depending
on usage. Remember to turn off the Polaroid
Lab after use to conserve battery life.
3. Load the film
Pick up the Polaroid Lab and gently pull
down the front of the Film door. Take the film
cassette out of the packaging and push the
film cassette all the way in, with the film's
darkslide facing up. When you close the film
door, the darkslide will eject from the Polaroid