Télécharger Imprimer la page

Topcom BABYVIEWER KS-4246 Manuel D'utilisateur page 4

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 15
®
7.1
Baby unit components
See Figure
on the fold-out page.
A
1
On/off LED
2
Night light LED
3
Infrared LED for night
vision
4
On/off switch
5
Lens
6
Microphone
7
Wall mounting cavity
7.2
Parent unit components
See Figure
on the fold-out page.
B
14
Volume LED
15
Microphone
16
Increase volume /
Next menu item
17
Decrease volume /
Previous menu item
18
Music button
19
Camera button
20
3,5" (8,8cm) colour display
21
Link LED
7.3
Display description
Out of range or no
connection
Volume icon
Melody icon
8
Initial use
8.1
Package content
The equipment is supplied as standard with the following items:
- 1 baby unit
- 1 parent unit
- 2 AC mains adapters
8.2
Installing batteries in the baby unit
You can operate the baby unit with 4 AAA
cells (LR03; we recommend alkaline cells)
or the included AC mains adapter.
The baby unit cannot recharge batteries.
It is recommended to always leave the
batteries in the unit, even if you use the AC
mains adapter. The unit will automatically
switch to battery power in case of a mains
power interruption.
– Turn the screw on the cover of
the battery compartment at
the back of the baby unit 90°
counter clockwise and remove
the battery compartment
cover.
Do not turn the screw past the "OPEN" point.
4
8
Crib connector nut
9
Light sensor
10
Pair button
11
Speaker
12
Connector for AC mains
adapter
13
Room temperature sensor
22
Power on/off LED
23
Menu button
24
Push to Talk button
25
On/off button
26
Belt clip
27
Speaker
28
Connector for AC mains
adapter
29
Battery cover with screw
LCD display
brightness icon
Temperature unit
C
icon
Night light icon
- 1 user guide
- 1 Li-ion rechargeable battery pack
OPEN
90° MAX
Babytalker 3500 SEDS
– Fit four AAA alkaline
cells (LR03) in the
battery compartment.
Ensure that the polarity is
correct.
– Close the battery
compartment.
Never mix used cells with fresh cells.
8.3
Connecting the baby unit to the AC mains
Insert the small plug of the
AC mains adapter in the
mains power connector of
the baby unit
and plug
12
the AC mains adapter into a
mains connector (100~240
V - 50/60 Hz).
CAUTION
The mains connector must be within easy reach so
you can quickly unplug the power cable in an
emergency.
Use only the supplied AC mains adapter (6 V DC /
800 mA).
8.4
Installing the rechargeable battery pack in
the parent unit
See Figure
on the fold-out page.
B
CAUTION
Use only the supplied Li-ion battery pack in the parent
unit.
– Rotate the belt clip
upward.
26
– Turn the screw on the
cover
of the
25
battery compartment
at the back of the
parent unit 90°
counter clockwise and
remove the battery
compartment cover.
Do not turn the screw past the "OPEN" point.
– Place the Li-ion battery pack in the battery compartment.
Ensure that the battery contacts do make contact with
the charge contacts as illustrated.
– Carefully close the battery compartment and rotate the
belt clip back downwards.
8.5
Connecting the parent unit to the AC mains
– Insert the small plug of the AC mains adapter in the
mains power connector
adapter into a mains connector (100~240 V - 50/60 Hz).
It takes around 10 hours to fully charge the
batteries.
and plug the AC mains
28

Publicité

loading