Publicité
Les langues disponibles
Les langues disponibles
E
N
IMPORTANT SAFETY INSTRUCTIONS
G
This symbol found on the apparatus indicates hazards
L
arising from dangerous voltages.
I
This symbol found on the apparatus indicates the user
S
should read all safety statements found in the user manual.
H
This symbol found on the apparatus indicates
double insulation.
Warning!
To reduce the risk of fire or electrical shock, do not
expose this apparatus to rain or moisture.
Read these instructions.
1.
2.
Keep these instructions.
3.
Heed all warnings.
Follow all instructions.
4.
Do not use this apparatus near water.
5.
6.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with
7.
the manufacturer's instructions.
8.
Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
produce heat.
Do not defeat the safety purpose of the polarized or grounding-
9.
type plug. A polarized plug has two blades with one wider than the
other. A grounding-type plug has two blades and a third grounding
prong. The wide blade or the third prong is provided for your
safety. If the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
10.
Protect the power cord from being walked on or pinched particularly
at plugs, convenience receptacles, and the point where they exit
from the apparatus.
11.
Only use attachments/accessories specified by the manufacturer.
Unplug this apparatus during lightning storms or when unused for
12.
long periods of time.
13.
Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way, such
as power-supply cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has
been dropped.
Maintain a minimum distance of 2" (50mm) around the front, rear,
14.
and sides of the apparatus for sufficient ventilation. The ventilation
should not be impeded by covering the ventilation openings or
placing on or around the apparatus items such as newspapers,
table-cloths, curtains, etc.
No open flame sources, such as lighted candles, should be
15.
placed on the apparatus.
The apparatus shall not be exposed to dripping or splashing.
16.
No objects filled with liquids, such as vases, shall be placed on
the apparatus.
Either the power inlet connector on the rear of the apparatus or
17.
the power plug at the wall must remain accessible, to be able to
disconnect power from the apparatus.
To completely disconnect this apparatus from the AC Mains,
18.
disconnect the power supply cord plug from the AC receptacle.
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby Laboratories.
2
American Users:
Note:
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equip-
ment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
Caution:
Unauthorized changes or modifications to the receiver could
void the user s authority to operate the equipment.
RF exposure warning This equipment must be installed and
operated in accordance with provided instructions and the antenna(s)
used for this transmitter must be installed to provide a separation
distance of at least 20 cm from all persons and must not be
co-located or operating in conjunction with any other antenna or
transmitter. End-users and installers must be provided with antenna
installation instructions and transmitter operating conditions for
satisfying RF exposure compliance.
Canadian Users:
This class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de classe B est conforme á la norme
NMB-003 du Canada.
This device complies with Industry Canada license-exempt RSS
standard(s). Operation is Subject to the following two conditions: (1) this device
may not cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
Radio Frequency (RF) Exposure Information The radiated output
power of the Wireless Device is below the Industry Canada (IC) radio
frequency exposure limits. The Wireless Device should be used in such a
manner such that the potential for human contact during normal operation
is minimized.
This device has also been evaluated and shown compliant with the IC RF
Exposure limits under mobile exposure conditions. (antennas are greater
than 20cm from a person's body).
This device has been certified for use in Canada. Status of the listing in
the Industry Canada's REL (Radio Equipment List) can be found at the
following web address:
http://www.ic.gc.ca/app/sitt/reltel/srch/nwRdSrch.do?lang=eng
Additional Canadian information on RF exposure also can be found
at the following web address: http://www.ic.gc.ca/eic/site/smt-
gst.nsf/eng/sf08792.html
European Users:
RLAN - Radio Local Area Network Equipment
AT CZ FI
IS
LT
PT SE
BE DK DE
IE MT SK CH
EE
GR LV NL SI
TR LU CY
HU PL ES GB NO
This equipment may only be used indoors in FR.
This equipment may only be used in one's own premises in IT.
This equipment is for private use only in LU
Operation is not allowed within a radius of 20 km from the centre
of Ny-Ålesund in NO.
Hereby, Boston Acoustics, Inc. 300 Jubilee Drive, Peabody, MA 01960
USA, declares that this SoundWare XS Digital Cinema is in compliance
with the essential requirements and other relevant provisions of Directive
1999/5/EC. A copy of the Declaration of Conformity (DOC) may be
obtained from:
Oliver Kriete
Boston Acoustics, Division of D&M Europe B.V.
Beemdstraat 11
5653 MA Eindhoven
'
The Netherlands
FR
IT
Publicité
