File Backup On A Macintosh; System Requirements; Connecting The Camera To The Macintosh - JVC GZ-MG430 Manuel D'utilisation

File Backup on a Macintosh

You can back up camera fi les onto your
computer.

System Requirements

Hardware:
Macintosh must be standard equipped with
USB 2.0 port
OS:
Mac OS X (v10.3.9, v10.4.2 to v10.4.10)
Connecting the Camera to the
Macintosh
Preparation:
Close the LCD monitor to turn off the camera.
USB Jack
USB Port
NOTES
•
Never disconnect the USB cable while the
access/charge lamp on the camera lights or
blinks.
•
Do not turn off the camera when the USB
cable is connected, to prevent malfunctions
of the PC.
•
Connect the camera directly to the
computer, not through a hub.
•
Do not use an extension USB cable.
30
DC Jack
USB Cable
AC Adapter
To AC Outlet
®
•
When you copy fi les from the computer to
the recording medium on the camera, do not
include any other fi les than those recorded
with the camera.
•
Do not delete, move, or rename the fi les and
folders in the camera from the computer.
L
When you have fi nished operation
Always follow the procedures below when
disconnecting the camera, or turning the
power of the camera/computer off.
Failing to do so may cause damage to the
camera and computer off.
1) Drag & drop the recording medium icon
on the desktop into the [Trash] icon.
If the confi rmation message appears,
click [OK].
2) Confi rm that the access/charge lamp on
the camera does not light or blink.
If the access/charge lamp lights or
blinks, wait until it is turned off before
proceeding.
3) Disconnect the USB cable.
4) Turn off the camera and computer.