Control Panel - Kuppersbusch ITE137-0 Mode D'emploi

Environment Protection
This appliance does not contain gasses
which could damage the ozone layer, in
either its refrigerant circuit or insulation
materials. The appliance shall not be dis-
carded together with the urban refuse
and rubbish. The insulation foam con-
tains flammable gases: the appliance

Control panel

1
1 ON/OFF switch
2 Display
3 Function button
1. Door open alarm indicator
2. Positive or negative temperature indica-
tor
3. Temperature indicator
4. Fast Freeze indicator
Switching on
After plugging the plug into the power outlet,
if the display is not illuminated, press ON/OFF
switch, appliance on.
As soon as the appliance is turned on, the
following signals will appear on the control
panel:
• Positive or negative temperature indicator
will be positive, indicating that the temper-
ature is positive
• the Temperature indicator flashes, the
background of the display is red and you
will hear a buzzer.
shall be disposed according to the ap-
plicable regulations to obtain from your
local authorities. Avoid damaging the
cooling unit, especially at the rear near
the heat exchanger. The materials used
on this appliance marked by the symbol
2
4 Temperature regulator
Display
1 2 3
Press Function button and the buzzer will go
off (also see "Excessive temperature alarm" ).
Place the Temperature regulator in a middle
position, and the appliance will be set up to
provide the following temperature:
roughly -18°C in the freezer.
Functions Menu
Each time Function button is pressed, the
following functions are activated in a clock-
wise direction:
• Fast Freeze function
• no symbol: normal operation.
Switching off
The appliance is shut off by pressing ON/OFF
switch for more than 1 second.
After this, a countdown of the temperature
from -3 -2 -1 will be shown.
are recyclable.
MODE
3 4
4
17