ASROCK X58 Deluxe Mode D'emploi page 24

Step 2.

Connect two Radeon graphics cards by installing ASRock XFire_Bridge_3S

Card on ASRock XFire_Bridge_3S Card Interconnects on the top of Radeon

graphics cards. (If there are two gold fingers on each Radeon graphics card,

please use two ASRock XFire_Bridge_3S Cards to connect two Radeon graphics

cards.)

ASRock XFire_Bridge_3S Card

Step 3.

Connect the DVI monitor cable to the DVI connector on the Radeon graphics

card on PCIE1 slot. (You may use the DVI to D-Sub adapter to convert the DVI

connector to D-Sub interface, and then connect the D-Sub monitor cable to the

DVI to D-Sub adapter.)

2.6.1.2 Installing Four CrossFireX

Cards

Step 1.

Insert Radeon graphics cards into PCIE1, PCIE2, PCIE3 and PCIE4 slots.

Make sure that the cards are properly seated on the slots.

Step 2.

Use one CrossFireX

and PCIE2 slots, use another CrossFireX

ics cards on PCIE3 and PCIE4 slots, and use the other CrossFireX

connect Radeon graphics cards on PCIE2 and PCIE3 slots. (CrossFireX

Bridge is provided with the graphics card you purchase, not bundled with this

motherboard. Please refer to your graphics card vendor for details.)

CrossFireX

2 4

-Ready Graphics

Bridge to connect Radeon graphics cards on PCIE1

Bridge

ASRock X58 Deluxe Motherboard

Bridge to connect Radeon graph-

Bridge to