Oakley KILL SWITCH Manuel D'utilisation page 3

2 | OAKLEY KILL SWITCH INSTRUCTION MANUAL
™
OAKLEY KILL SWITCH
™
Keeping up with the moment is just killing time, so we engineered a timepiece that keeps up with your attitude. Oakley
Kill Switch evolves with your surroundings so your style never goes stagnant, your look defies definition and the
™
world can't pin you down. An interchangeable bezel makes it possible, and the range of options will continue to grow.
Swap it out easily and go from a rugged job-site look to something that puts an edge on sophistication for after hours,
and deck it with a diamond bezel for venues that demand the ultimate. Dress up or dress down — you'll have all the
freedom and versatility you need, and you'll have it with a single timepiece.
Cradled in impact-forged stainless steel and comfortably strapped to your wrist with Unobtainium
jewel Swiss Made quartz movement drives an analog display with authentic Oakley styling. The case is crafted with
high-precision Computer Numeric Control machining and, matched with a pure sapphire crystal, it achieves a water
resistance rating of 100 meters (330 feet). Convenience features include a date display and an End Of Life system to
indicate when the battery has reached the end of its five-year endurance lifespan.
SETTING THE DATE AND TIME
Your Oakley timepiece features a screw-down crown for
added protection against moisture. After it is unscrewed
from the case, the crown can be pulled out to two click
positions for setting the date and time.
To set the date and time for the first time (or to reset
rubber, a five-
®
the date and time after the battery is changed), do the
following:
1. Unscrew the crown from the case and pull it out to the
first click position (a).
2. Turn the crown clockwise until yesterday's date
appears.
3. Pull the crown out to the second click position (b).
4. Turn the hands forward until today's date appears,
then continue forward until the current time is
reached. If the current time is in the afternoon or
evening, move the hour hand all the way around the
dial to pass 12 o'clock noon.
5. Push the crown back in. Gently turn the crown
clockwise until it screws back into the case. Be careful
not to over-tighten the crown, as this will damage the
mechanism.
To set the exact second, wait until the second counting
hand reaches 12 before you pull out the crown. Set the
time, then wait until the exact second is reached before
pushing the crown back in.
OAKLEY KILL SWITCH INSTRUCTION MANUAL | 3
™
SETTING THE DATE AND TIME
CROWN
b
a
SECOND HAND
DATE