Troubleshooting - KitchenAid KFP1356 Instructions

CARE AND CLEANING CMD + SHIFT CLICK TO CHANGE COPY
To prevent damage to the locking
4
system, always store the work bowl
and work bowl cover in the unlocked
position when not in use. Wrap the
power cord around the work bowl,
then secure the plug by clipping it
to the cord.

TROUBLESHOOTING

If your_ Food Pr_ocessor_ should malfunction or_ fail to oper_ate, check the following:
Food Pr_ocessor_ doesn't r_un:
• Make sure that the bowl and lid are
properly aligned and locked in place and
the large food pusher is inserted in the
feed tube.
• When using the large feed tube opening,
make sure that food is not above the Max.
Fill line on the feed tube.
• Press only one button at a time. The Food
Processor will not operate if more than
one button is pressed at the same time.
• Is the Food Processor plugged in?
• Is the fuse in the circuit to the Food
Processor in working order? If you have
a circuit breaker box, be sure the circuit
is closed.
• Unplug the Food Processor, then plug it
back into the outlet.
• If the Food Processor is not at room
temperature, wait until it reaches room
temperature and retry.
For_ additional infor_mation, call KitchenAid at 1-800-541-6390
24
W10782139A_EN_v04.indd 24
Store the blades and discs in the storage
5
case, out of the reach of small children.
Food Pr_ocessor_ not shr_edding or_
slicing pr_oper_ly:
• Make sure the raised-blade side of
the disc is positioned face up on the
common adapter.
• If using the adjustable slicing or shredding
blades, make sure it is set to the correct
thickness.
• Make sure ingredients are suitable for
slicing or shredding. See "Tips for Great
Results" section.
If the wor_k bowl cover_ won't close
when using the disc:
• Make sure the disc is installed correctly,
with the raised nub on top, and is
positioned properly on the drive adapter.
If the problem is not due to one of the
above items, see the "Warranty and service"
section.
Do not return the Food Processor to the
retailer. Retailers do not provide service.
W
2/26/15 2:32 PM