Installing The Adjustable Slicing Disc; Adjusting The Slicing Thickness - KitchenAid KFP1356 Instructions

ASSEMBLING THE FOOD PROCESSOR CMD + SHIFT CLICK TO CHANGE COPY

Installing the adjustable slicing disc

IMPORTANT: The adjustable slicing disc can only be installed in one direction.
Drop the drive adapter over the
1
power shaft.
TIP: You may need to adjust the drive
adapter with a slight turn on the power
shaft until it drops into place.
Drop the assembled disc onto the drive
3
adapter and check to make sure it is
firmly in place.

Adjusting the slicing thickness

Thinner_
Set the desired thickness by moving the lever
to the left for thinner slices and to the right
for thicker slices.
14
W10782139A_EN_v04.indd 14
Use the finger holes to hold the top of
2
the adjustable slicing disc. Align the pins
on the slicing adapter with the L-slots
on the bottom of the disc. Turn to lock
into place.
Install the work bowl cover, being sure
4
it locks into place.
NOTE: The lever only works with
the externally adjustable slicing disc.
Changing thickness settings with other
discs or blades installed will have no
Thicker_
effect on operation.
C A
2/26/15 2:32 PM