Dometic WAECO AMP100 Instructions De Montage Et De Service page 20

Technical description
5.1 Connections
The control box has the following connections:
No. in fig. 5,
page 6
3
4
5
6
7
8
9
20
Connection description
AV output (cinch socket) for connecting...
to a navigation system with an AV input (cinch socket)
another monitor with an AV input (cinch socket) or a video record-
er.
Camera connection
Green control cable (+ signal) for connecting the positive line of the
reversing light.
When you engage the reverse gear, the control box is activated via
this cable.
Black control cable (+ signal) with flat plug lug for connection of the
RV-AMP-SW rocker switch
This cable must be connected when a video source in addition to the
rear view camera – such as a navigation system or DVD player – is
connected to the monitor and you would like to activate the camera
when parked or driving forwards.
Black control cable (+ signal) with round plug lug for connection to
the monitor's S/BY signal input.
The monitor is switched on via this cable when the control box is acti-
vated.
Red cable: connection to 12-V to 24-V positive (e.g. connected posi-
tive terminal, terminal 15)
Brown cable: connection to earth (terminal 31)
AMP100