Publicité
Les langues disponibles
Les langues disponibles
6. Changing and Saving Temperature Set Value
Main Operation Screen
O
O
C
F
When SET button pressed ''S'' led will
be active and temperature set value will
be displayed.
O
O
C
F
When ENTER button pressed
temperature set value can be saved.
Temperature set value parameter (Default=50) MODBUS ADDRESS:40001
Temperature set
value, can be programmed between minimum temperature set value
maximum temperature set value
6.1 Programming Mode Parameter List
Temperature Unit Selection Parameter
°C selected.
°F selected.
Decimal Seperator Enabling Parameter
Disable.
Enable.
Note: If sensor input type is selected J, K, PT-100 or PT-1000 (BC =05,10,11 or 14)
skipped.
Hysteresis Parameter for Compressor Output ( Default = 1 )
MODBUS ADDRESS:40004
from 1 to 20°C for NTC (-50°C, 100°C) or PTC (-50°C, 150°C) or J Type TC ( 0°C, 800°C ) or
K Type TC ( 0°C, 1000°C or PT-100 Type ( -50°C,400°C ) or PT-1000 Type ( -50°C,400°C )
or PT-100 Type ( -20°C,100°C ),
from 1 to 36°F for NTC (-58°F, 212°F) or PTC (-58°F, 302°F) or J Type TC (32°F,1472°F)or
K Type TC (32°F,1830°F) or PT-100 Type (-58°F,752°F) or PT-1000 Type (-58°F,752°F)
or PT-100 Type (-4°F,212°F)
from 0.1 to 10.0°C for NTC(-50.0°C,100.0°C) or PTC (-50.0°C,150.0°C)
or PT-100 (-19.9°C,99.9°C),
from 0.1 to 18.0°F for NTC (-58.0°F,212.0°F) or PTC (-58.0°F,302.0°F) or
PT-100 (-4.0°F,212.0°F),
In ON/OFF control algorithm, temperature
value is tried to keep equal to set value by
opening or closing the last control element.
ON/OFF controlled system, temperature
value oscillates continuously. Temperature
value's oscillation period or amplitude around
set value changes according to controlled
system. For reducing oscillation period of
temperature value, a threshold zone is formed
below or around set value and this zone is
named hysteresis.
ESM3710-N
S
P
SET
P
ü
ESM3710-N
S
P
SET
P
ü ü
.
SET Value Screen
Temperature set value can
be changed with increment
and decrement buttons.
Main Operation Screen
''S'' will be inactive and goes back to
main operation screen.
( Default = 0 ) MODBUS ADDRESS:40002
( Default = 0 ) MODBUS ADDRESS:40003
Temperature
HSt
Set
Control
Output
ON
OFF
ESM3710-N
O
O
C
F
S
P
SET
P
ü
ESM3710-N
O
O
C
F
S
P
SET
P
ü ü
and
parameter
is
HSt
Time
Time
8
Publicité
