RS Pro ESM-3710N Manuel D'utilisation page 10

Buzzer is active during this time
If buzzer function selection parameter value
observed. Buzzer stays active during this time. It can be adjusted from 1 to 99 minutes
When this parameter is 1, if decrement button is pressed,
condition buzzer is active till buzzer silence button is pressed.
Communication Mode Selection Parameter
Slave ID Parameter
Device communication address parameter (1 to 247).
Programming Section Accessing Password
It is used for accessing to the programming section. It can be adjusted from 0 to 9999. If it is
selected 0, password will not be asked
i
,
is selected "Cooling". If operation type is selected "Heating " ,skip to the
6.2 Modbus Adresses of Device Status Parameters (Read Input Register)
MODBUS ADDRESS:30001
MODBUS ADDRESS:30002
A
A
MODBUS ADDRESS:30003
A
A
A
MODBUS ADDRESS:30004
MODBUS ADDRESS:30005
( Default =
PROKEY communication selected.
Rs485 communication selected.
( Default = 1 ) MODBUS ADDRESS=40018
, , ,
Temperature Value
Led Status : 0.bit C Led,
6.bit Compressor Led,
13.bit Program Led, 14.bit Set Led
Device Status :
Output Status
Device Type and Device Version
) MODBUS ADDRESS:40016
=0, this parameter can not be
( Default = 0 ) MODBUS ADDRESS:40017
( Default = 0 ) MODBUS ADDRESS:40019
.
and Parameters are observed if Operation type
o
1.bit Buzzer Status
2.bit Sensor Lost Status
is observed. In this
parameter
10