Maintaining; Cleaning The Cabinet; Getting A Clear Picture; Moisture Condensation - Insignia NS-H4005 Guide De L'utilisateur

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Insignia NS-H4005 Home Theater System
Symptom
Timer recording is not
possible.
indicator appears after
your home theater
system is turned off.
Audio is not played or
recorded in stereo.

Maintaining

Cleaning the cabinet

Use a soft, dry cloth. If the surfaces are extremely dirty, use a soft
cloth lightly moistened with a mild detergent solution. Do not use
strong solvents such as alcohol, benzine, or thinner because these
might damage the surface of your home theater system.

Getting a clear picture

Your home theater system is a high-tech, precision device. If the
optical pick-up lens and disc drive parts are dirty or worn, the picture
quality will be poor.
Regular inspection and maintenance are recommended after every
1,000 hours of use. (This depends on the operating environment.) For
details, contact your nearest dealer.

Moisture Condensation

Moisture condensation can occur:
When your home theater system is moved from a cold place to
a warm place.
Under extremely humid conditions
In locations where moisture condensation may occur:
Keep your home theater system plugged into an power outlet
and turned on. This will help prevent condensation.
When condensation has occurred, wait a few hours for your
home theater system to dry before using it.
Cause
The clock is not set
correctly.
The Timer Recording
was set up incorrectly.
Your home theater
system is in Timer
Recording mode.
The TV is not
stereo-compatible.
The current program is
not in stereo format.
www.insignia-products.com
Solution
Set the clock.
Reprogram the Timer
Recording.
This is the normal
indication that your home
theater system is in
TIMER mode.
No action is possible.
No action is possible.
55

Publicité

Table des Matières
loading

Table des Matières