Geberit HyTronic Mode D'emploi page 52

Service
Programs
Menu item Description
[EN]
[DE]
30 Select interval flush.
[IntFlush] Starts the interval flush
[IntervSp] program. The control flushes
automatically at the interval
dictated by the entered value
43 [IntervalT] [IntervalZ] for the
duration of the entered value
42 [IntFlushT] [IntervSpZ] after
the last use
31 Select power-on flush.
[PowOnFlsh] If the mains voltage is on, a
[NetzEinSp] flush is released by the control
32 Select dynamic flush.
[DynFlush] Flush control adapts itself to the
[DynamSpül] user frequency
33 Select follow-up flush.
[FollwFlsh] Flushes once at the end of the
[FolgeSpül] entered value 41 [DelFollwF]
[FolgVerzö] after the last use
34 Select post flush.
[PostFlush] Flushes for 2 s, 3 s after a main
[NachSpül] flush
Parameters
Menu item Description
[EN]
[DE]
40 Set flush time.
[FlshTime] Duration of the flush after one
[Spülzeit] use
41 Set delay of follow-up flush.
[DelFollwF] Is active when the
[FolgVerzö] 33 [FollwFlsh] [FolgeSpül] menu
is [ON]
42 Set flush time - interval flush.
[IntFlushT] Is active when the 30 [IntFlush]
[IntervSpZ] [IntervSp] menu is [ON]
43 Set flush interval - interval flush.
[IntervalT] Is active when the 30 [IntFlush]
[IntervalZ] [IntervSp] menu is [ON]
44 Set cleaning time.
[CleanTime] Defines the length of inactive
[ReiniZeit] time of the flush control when
the menu 24 [CleanMode]
[Reinigung] is started
52
Application
a) Refilling the trap if the
frequency of use is low
b) Flushing out of stagnant
water
a) Releasing the central flush
b) Function confirmation
Shortening the flush time for
high user frequencies (e.g. in a
sports stadium)
a) Flushing the urinal ceramic
b) Filling up the trap
Filling up the trap
Application
a) Optimisation of flushing the
urinal ceramic
Note water consumption
–
–
–
–
Adjustment Factory
range settings
On = [ON] On = [ON]
Off = [OFF]
On = [ON] Off = [OFF]
Off = [OFF]
On = [ON] On = [ON]
Off = [OFF]
On = [ON] Off = [OFF]
Off = [OFF]
On = [ON] Off = [OFF]
Off = [OFF]
Adjustment Factory
range setting
3 - 15 s [...] 5 s [5]
1 - 24 h [...] 2 h [2]
3 - 180 s [...] 5 s [5]
1 - 168 h [...] 24 h [24]
1 - 16 min [...] 10 min [10]