Publicité
Les langues disponibles
Les langues disponibles
GB
Max. delivery rate:
Max. viscosity:
Max. pressure spikes: 180 bar
Power source:
Power consumption: 110 W
Round spray nozzle: 0.8 mm
Weight:
Oscillation level:
1 Paint container 800 ml
2 Locking nut
3 Nozzle 0,8 mm
4 Housing
5 4-step electronic system 10 Cleaning brush
Materials to be used:
Paints and varnishes containing solvents, acrylic enamel paints, water-soluble varnishes,
glazes, polishes, wood preservatives, disinfectants, plant protectives, saturants, as
well as oils and other watery liquids.
Dispersion and latex paints, bituminous paints. In the case of dispersion paints that contain
fine quartz or similar materials: Observe the specifications in the handling table.
The following spray substances are not suitable for use:
Materials containing strong abrasives, glazes with coarse particles, strippers and caustic
solutions, silicate paints. Use of these spray materials can lead to increased wear or
corrosion damage in the pump area, which are not covered by the WAGNER-Guarantee.
Functional Description of the Spray Gun
The spray gun sucks in spray materials. The airless atomisation results when the spray material
is pumped at high pressure through the swirl system and the nozzle bore.
Preparing the Spray Material
The paints usually need to be diluted for use with the spray gun. You will find guidelines
for sprayable dilutions in the following viscosity table (viscosity = consistency
of the paint). You can achieve the correct dilution by using the viscosity test cup.
14
Technical Data
20 -350 g/min
(runout time) 280 sec. Double insulation:
230 V, 50 hz
1.5 kg
10.5 m/s²
Description (Illus. 1)
6 Fine-adjustment knob 11 Suction tube
7 ON/OFF switch
8 Grip
9 Pump housing
Container capacity: 800 ml
Pump:
Pump cylinder:
Piston:
Sound pressure
level:
Sound pressure
output:
12 Nozzle spanner
13 Oil bottle
14 Viscosity measuring cup
W 450 SE
Replaceable
Hard metal
Hard metal
86 dB(A)
99 dB(A)
Publicité
