Muskoka 37-196-48 Guide D'utilisation Et D'entretien page 9

Assembly (continued)
ATTACHING THE SUPPORT PANEL
1. Attach the support panel (S) to the media
shelf (B) by lining up the holes in the bottom
of the support panel (S) with the holes in the
media shelf (B). Insert and tighten two screws
(KK) through the media shelf (B) into the
support panel (S).
2. Do not strip the screws (KK) by overtightening.
ATTACHING THE TOP RAIL
1. Insert four wood dowels (DD) into the
unthreaded holes in the sides of the top rail (J).
2. Line up the wood dowels (DD) in the top rail (J)
with the unthreaded holes in the sides of the
left and right front panels (T & U). Press together
firmly until flush.
3. Insert 4 wood dowels (DD) into the unthreaded
holes on the back of the left and right front
panels (T & U).
4. Line up the wood dowels (DD) in the left and
right front panels (T & U) with the unthreaded
holes in the left and right side panels (E & F).
5. Line up the long connectors (CC) in the left
and right side panels (E & F) with the holes
in the left and right front panels (T & U). Press
together firmly until flush.
6. Attach the top rail assembly to the left and
right side panels (E & F) by inserting two bolts
(AA) through the long connectors (CC) in the
left and right side panels (E & F) and turning
clockwise. Do not strip the bolts (AA) by
overtightening.
S
E
DD
J
B
U
F
KK
B
C
CC
DD
AA
T
E
9