Muskoka 37-196-48 Guide D'utilisation Et D'entretien page 7

Assembly (continued)
ATTACHING THE MEDIA SHELF
1. Insert four wood dowels (DD) in the
unthreaded holes of the media shelf (B).
2. Line up the wood dowels (DD) in the media
shelf (B) with the unthreaded holes in the
left and right inner panels (G).
3. Line up the short and long connectors
(BB & CC) attached to the inner panel
assembly with the holes in the media shelf
(B).
4. Press the inner panel assembly down firmly
onto the media shelf until flush.
5. Insert four bolts (AA) into the short and long
connectors
(BB & CC) on the inner panel assembly.
6. Attach the inner panel assembly to the
media shelf (B) by turning the bolts (AA)
clockwise. Do not strip the bolts (AA) by
overtightening.
ATTACHING THE BASE
1. Insert six wood dowels (DD) into the
unthreaded holes in the media shelf
assembly.
2. Line up the wood dowels (DD) with the
unthreaded holes in the base panel (C).
Press together firmly until flush.
3. Attach the base panel (C) to the media
shelf assembly by inserting two bolts (AA)
through the long connectors (CC) on the
inner panels (G) and turning clockwise. Do
not strip the bolts (AA) by overtightening.
G
M
B
AA
CC
DD
C
G
B
AA
BB
G
CC
AA
DD
G
7