Muskoka 37-196-48 Guide D'utilisation Et D'entretien page 11

Assembly (continued)
ATTACHING THE BACK PANELS
1. Locate the back panels (D & N) and line them
up to the back of the media console with the
finished side facing in.
2. Insert and tighten thirty screws (FF) to attach
the back panels (D & N) to the media console.
3. Do not strip the screws (FF) by overtightening.
ATTACHING THE DOORS AND KNOBS
1. Loosen the screws in the hinge plates (GG) in
the left and right side panels (E & F).
2. Line up the hinges in the left and right doors (H)
with the hinge plates (GG) in the left and right
side panels
(E & F).
3. Tighten the screws to attach the hinges to
the hinge plates (GG) on the left and right
side panels (E & F). Do not strip the screws by
overtightening.
4. Attach knobs (EE) to the left and right doors (H)
by inserting the bolts through the doors (H) and
turning clockwise into the knobs (EE). Do not
strip the bolts by overtightening.
NOTE: The door's left/right and forward/back,
positions are adjusted by turning the screws in
the hinge pivot as shown in the illustration.
N
FF
GG
H
D
N
E
EE
F
H
11