Troubleshooting - Indesit PWDE 7145 W Mode D'emploi

Troubleshooting

see “
GB
Service”
Problem: Possible causes / Solutions:
The washer-dryer does not
switch on.
The wash cycle does not start.
.
The washer-dryer does not fill
with water (the text “H2O”
flashes on the display).
The washer-dryer continuously
takes in and drains water. see “Installation”)
see “Installation” .
The washer-dryer does not
drain or spin.
see “Wash cycles and options”).
see “Installation” .
The washer-dryer vibrates a lot see “Installation”)
during the spin cycle. see “Installation”)
see “Installation”)
The washer-dryer leaks. see “Installation” .
see “Care
and maintenance”)
see “Installation” .
The “option” and START/PAUSE
indicator lights flash rapidly and
an error code appears on the
display (e.g.: F-01, F-..).
There is too much foam.
The washer-dryer does not dry.
11