Triton TRTA 001 Instructions D'utilisation page 4

Introduction
Thank you for purchasing this Triton tool. This manual contains information necessary
for safe and effective operation of this product. This product has unique features and,
even if you are familiar with similar products, it is necessary to read this manual
carefully to ensure you fully understand the instructions. Ensure all users of the tool
read and fully understand this manual.
Description of Symbols
The rating plate on your tool may show symbols. These represent important information about
the product or instructions on its use.
Wear hearing protection
Wear eye protection
Wear breathing protection
Wear head protection
Wear hand protection
Read instruction manual
Caution!
Specification
Model number:
Adjustment:
Micro adjustment range:
Track compatibility:
Router compatibility:
General Safety
WARNING Read all safety warnings and all instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or serious injury.
WARNING: This appliance is not intended for use by persons (including children) with
reduced, physical or mental capabilities or lack of experience or knowledge unless they
have been given supervision or instruction concerning use of the appliance by a person
responsible for their safety. Children must be supervised to ensure that they do not play
with the appliance.
Save all warnings and instructions for future reference.
1) Work area safety
a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b) Do not operate tools in explosive atmospheres, such as in the presence of
flammable liquids, gases or dust.
c) Keep children and bystanders away while operating a powered tool. Distractions can
cause you to lose control.
2) Personal safety
a) Stay alert, watch what you are doing and use common sense when operating a
powered tool. Do not use a powered tool while you are tired or under the influence
of drugs, alcohol or medication. A moment of inattention while operating a powered tool
may result in serious personal injury.
GB
b) Use personal protective equipment. Always wear eye protection. Protective
equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used
for appropriate conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure the switch is in the off-position when not
operating the tool and make use of other safety features which prevent unintentional
starting
d) Remove any adjusting key or wrench before turning the powered tool on. A wrench
or a key left attached to a rotating part of the tool may result in personal injury.
e) Do not overreach. Keep proper footing and balance at all times. This enables better
control of the tool in unexpected situations.
4
Original Instructions
TRTA001
Macro/ Micro
0-13mm (0-33/64")
Triton TTSTP, TTST1500
JOF001, MOF001, TRA001
f) Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and
gloves away from moving parts. Loose clothes, jewelry or long hair can be caught in
moving parts.
g) If devices are provided for the connection of dust extraction and collection facilities,
ensure these are connected and properly used. Use of dust collection can reduce
dust-related hazards.
WARNING: User exposure to tool vibration can result in loss of sense of touch, numbness,
tingling and reduced ability to grip. Long term exposure can lead to a chronic condition.
If necessary limit the length of time exposed to vibration. Use the figures provided in the
specification relating to vibration if provided to calculate the duration and frequency of
operating the tool. The 2002/44/EC directive relating to vibration in the workplace may provide
useful information even for domestic use of tools. In the first instance of feeling uncomfortable
due to vibration STOP using the tool immediately.
WARNING: Always wear ear protection where the sound level exceeds 85dB(A) and limit the
time of exposure if necessary. If sound levels are uncomfortable even with ear protection stop
using the tool immediately and check the ear protection is correctly fitted and provides the
right level of sound attenuation for the level of sound produced by your tool.
3) Tool use and care
a) Maintain tools. Check for misalignment or binding of moving parts, breakage of
parts and any other condition that may affect the tool's operation. If damaged, have
the tool repaired before use. Many accidents are caused by poorly maintained tools.
b) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to control.
c) Use the tool's accessories and tool bits etc. in accordance with these instructions,
taking into account the working conditions and the work to be performed. Use of the
tool for operations different from those intended could result in a hazardous situation.
4) Service
a) Have your tool serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the tool is maintained.
Product Familiarisation
1. Router Base Plate
2. Router Securing Holes
3. Macro Adjustment Knobs
4. Adaptor Body
5. Adjustment Locking Knob
6. Track Width Adjustment Screws
7. Micro Adjustment Screw
8. Base Plate Mounting Rails
Intended Use
• Accessory for Triton Precision Plunge Routers JOF001, MOF001 and TRA001 to attach
track lengths for making straight repeatable cuts in natural and composite woods.
Compatible with Triton Tracks TTSTP and TTST1500.
Unpacking Your Tool
• Carefully unpack and inspect your tool. Fully familiarise yourself with all its features and
functions
• Ensure that all parts of the tool are present and in good condition. If any parts are missing
or damaged, have such parts replaced before attempting to use this tool
Before Use
WARNING: ALWAYS disconnect from the power supply before fitting accessories or making
adjustments
Router Track Adaptor assembly
• Slide the Base Plate Mounting Rails (8) through the openings below the Macro Adjustment
Knobs (3), which are situated on the Router Base Plate (1)
• Securely fasten the Macro Adjustment Knobs
Note: Ensure that the Base Plate Mounting Rails leave enough space to attach the plunge
router on the adaptor.
Plunge router attachment
1. Locate the two plunge router baseplate mounting knobs, and loosen them entirely. This
permits the mounting studs to engage the Router Securing Holes (2)
2. Turn both the plunge router and the Router Track Adaptor upside down