Publicité
Les langues disponibles
Les langues disponibles
UK
CONNECTING A SPEECH PROCESSOR
COCHLEAR IMPLANT ADAPTER CORD
Caution: Before plugging any cord into your speech processor, you must consult your implant
manufacturer.
•
Plug the mono end of the plug into the speech processor.
•
Plug the stereo end of the plug into the Audio Output
socket on the telephone.
•
Speak into the handset when using the Cochlear Implant
Adapter Cord.
OUTGOING VOICE AMPLIFICATION
The EXL30 can amplify your outgoing voice by up to 15dB.To use this feature, set the Outgoing
Voice Amplifier switch to AMPLIFY located underneath the telephone unit.
NOTE: The factory pre-setting is NORMAL.
TROUBLE SHOOTING
PROBLEM
No dial tone.
Check all the telephone cable connections.
PROBLEM
Call cannot be dialled, or dials very slowly.
Reset the Dial Mode Switch (see Setting the Dial Mode).
PROBLEM
Visual Ring Indicator is not very bright.
Check and replace the 9 Volt battery.
PROBLEM
No number is dialled when the memory button is pressed.
No number stored in that Memory Button (see Programming the Memory Buttons).
PROBLEM
Call comes in but the telephone does not ring.
Check that the Telephone Line Cable is correctly connected.
11
All manuals and user guides at all-guides.com
Publicité
