Dimensions - Isotherm CR165 Instructions Pour L'installation Et L'utilisation

8 Dimensions

Model Width
(mm) [W]
CR 165 500
CR 219 550
CR 271 550
AS PER REGULATIONS AND FOR PROPER OPERATION, THE WALLS OUTSIDE OF THE REGRIGERATOR
SHOULD BE SET AT THE FOLLOWING DISTANCES FROM THE INTERNAL WALLS OF THE UNIT: 20mm ON
WALLS WHERE THE COMPRESSOR IS NOT PRESENT AND 50mm ON THE WALLS WHERE THE COMPRESSOR
IS PRESENT. IF THESE RULES CANNOT COMPLIED WITH, THE MINIMUM DISTANCE MEASUREMENTS MUST
BE 5mm AND THE MATERIALS WITH WHICH THE WALLS ARE MADE MUST BE EXPLOSION PROOF.
58
Height (mm) Depth (mm)
[H] Not including
door [D]
1210 520
1406 530
1650 530
User Manual
Door Thickness Cut-Out (mm)
(mm) [S] W:H
68 502:1212
68 552:1408
68 552:1652