Product Description And Specifications; Technical Data - Bosch GCO 220 Professional Notice Originale

OBJ_BUCH-3502-001.book Page 9 Tuesday, February 13, 2018 2:52 PM
Symbol Meaning
 Keep hands away from the cutting ar-
ea while the machine is running. Dan-
ger of injury when coming into contact
with the cutting disc.
 Wear ear protectors. Exposure to
noise can cause hearing loss.
 Wear safety goggles.
 Wear a dust respirator.
 Wear protective gloves.
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
Intended Use
The machine is intended for stationary use with cutting discs
to perform lengthways and crossways straight cuts or mitre
cuts to 45° in metal materials without the use of water.
Product Features
The numbering of the components shown refers to the repre-
sentation of the power tool on the graphic pages.
1 Lock-on button for On/Off switch
2 On/Off switch
3 Handle
4 Retracting blade guard
5 Spindle lock
6 Cutting disc
7 Angle stop
8 Clamping spindle
9 Quick-release button
10 Spindle handle
11 Mounting holes
12 Hex key (8 mm)
Bosch Power Tools
13 Base plate
14 Locking screw for angle stop
15 Transport safety-lock
16 Tool arm
17 Transport handle
18 Blade guard
19 Spark guard
20 Tool spindle
21 Clamping flange
22 Washer
23 Hexagon bolt
Accessories shown or described are not part of the standard deliv-
ery scope of the product. A complete overview of accessories can
be found in our accessories program.

Technical Data

Cut-off grinder
Article number
Rated power input
No-load speed
Weight according to EPTA-
Procedure 01:2014
Protection class
Permissible workpiece dimensions (maximum/minimum) see page 11.
The values given are valid for a nominal voltage [U] of 230 V. For differ-
ent voltages and models for specific countries, these values can vary.
Dimensions of suitable cutting discs
Cutting disc diameter, max.
Cutting discs width, max.
Mounting hole diameter
Assembly
 Avoid unintentional starting of the machine. During as-
sembly and for all work on the machine, the power plug
must not be connected to the mains supply.
Delivery Scope
Carefully remove all parts included in the delivery from their
packaging.
Remove all packaging material from the machine and the ac-
cessories provided.
Before starting the operation of the machine for the first time,
check if all parts listed below have been supplied:
– Cut-off grinder with mounted cutting disc
– Hex key 14
Note: Check the power tool for possible damage.
Before further use of the machine, check that all protective
devices are fully functional. Any lightly damaged parts must
be carefully checked to ensure flawless operation of the tool.
All parts must be properly mounted and all conditions fulfilled
that ensure faultless operation.
Damaged protective devices and parts must be immediately
replaced by an authorised service centre.
English | 9
GCO 220
3 601 M37 3..
W 2200
-1
min 3800
kg 15.0
/II
mm 355
mm 3
mm 25.4
1 609 92A 4B8 | (13.2.18)