Télécharger Imprimer la page

aldes VMC double flux Dee Fly Notice De Montage page 35

Masquer les pouces Voir aussi pour VMC double flux Dee Fly:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 1
MAINTENANCE
The Dee Fly HRV ventilation system can only remain efficient and provide its rated
capacity if it is regularly maintained.
1
A LACK OF RESPECT FOR THESE SIMPLE RULES MAY LEAD TO:
• Rapid damage to your property
• Low quality air in the home
• Total exclusion of the manufacturer's guarantee and thus you will be responsible for call-out charges and the replacement
of any defective equipment.
2
4
5
ONCE A YEAR
• During the 1st intervention, disconnect the motor from the power supply.
Remove the caps located on the cover. Place a screwdriver into the 2 holes and pierce
the covering. Restart the motor.
• Next, once a year, dust the fan-motor turbine wheel using a compressed air canister
(dry air). Fit the caps back onto the cover of the motor casing.
ONCE OR TWICE A YEAR
As indicated by the filter clogging warning
light on the control panel, change the heat
exchanger filters
• Remove the caps
• Remove the clogged filters
• Replace the filters making sure they
are correctly positioned in the right
direction
• Fit the caps back into place
• Re-initialise the control by pressing the
flow rate selection button for 5 seconds
until the red indicator light turns off.
Replacement filters for model with a by-pass (code 11023146)
Replacement filters for model without a by-pass (code 11023145)
3
6
35
Disconnect the electrical
supply before any
operations and ensure
that the unit cannot
be started
accidentally.
Never operate on the
electrical unit when
the unit is running
ONCE OR TWICE A YEAR
Clean the exhaust grilles
ONCE OR TWICE A YEAR
Top up the water trap

Publicité

loading