Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Do not operate machine before having read the
operating instructions, understood all the notes and
assembly the machine as described here.
Keep the instructions in a safe place for future use.
Contents
Declaration of Conformity
No. (S-No.): 11494
according to EC Directive 2006/42/EC
We,
ATIKA GmbH
Josef-Drexler-Str. 8, 89331 Burgau - Germany
herewith declare under our sole responsibility that the product
Laubsauger, -bläser, - häcksler (Garden vac, blower,
shredder) type KLS 1600
Serial number: 008700 - 025000
is conform with the above mentioned EC directives as well as with
the provisions of the guidelines below:
2004/108/EC, 2000/14/EC and 2011/65/EU.
Following harmonized standards have been applied:
EN 60335-1:2012; IEC 60335-2-100:2002; EN 62233:2008;
EN 55014-1/A1:2009; EN 55014-2/A2:2008;
EN 61000-3-2/A2:2009; EN 61000-3-3:2008
Conformity assessment procedure: 2000/14/EC - Appendix V.
Measured level of the acoustic output L
Guaranteed level of the acoustic output L
Duly authorised person for the complilation of technical
documents:
ATIKA GmbH - ATIKA GmbH - Technical department
Josef-Drexler-Str. 8 - 89331 Burgau - Germany
i.A.
Burgau, 29.09.2014
i.A. G. Koppenstein
Engineering design management
10
10
10
10
10
10
11
11
11
11
12
13
13
14
15
15
16
16
16
16
105 dB (A).
WA
108 dB (A).
WA
Extent of delivery
After unpacking, check the contents of the box
That it is complete
Check for possible transport damage
Report any damage or missing items to your dealer, supplier or
the manufacturer immediately. Complaints made at a later date
will not be acknowledged.
1 preassembled unit of equipment
1 operating bar
2 extension blow tubes
1 operating manual
1 assembly and operating instruction
sheet
Description of the device
1 Handle
2 On/Off switch
3 Cord grip
4 Cable clip
5 Connector
6 Hook for collecting bag
7 Blow hose
8 Mains plug
9 Operating bar
Symbols operating manual
Threatened hazard or hazardous situation. Not
observing this instruction can lead to injuries or cause
damage to property.
Important information on proper handling. Not
observing this instruction can lead to faults in the
machine.
User information. This information helps you to use all
the functions optimally.
Assembly, operation and servicing. Here you are
explained exactly what to do.
Please refer to the attached assembly and
operating instruction sheet for references
to figure numbers in the text.
...
Symbols machine
Carefully read operator's manual before handling the
machine. Observe instructions and safety rules when
operating.
Shut off engine and remove power cord before
performing cleaning, maintenance or repair work.
1 handle
1 blow hose
1 collecting bag
1 warranty
declaration
10 Collecting bag
11 Extension blow tube
12 Carrying handle
13 Motor
14 Turning knob for height
adjustment
15 Blow nozzle
16 Holder
17 Suction funnel
Publicité
Chapitres
Table des Matières
