Using The Roof Vent - Dometic GY 11 Mode D'emploi

GY11
➤ Put the rubber seal (fig. 3 4, page 4) into the groove on the underside of
the vent.
➤ Attach the vent (fig. 3 3, page 4) with six bolts (4,2 x 25).
I
NOTE
Pull the vent on tightly enough that the rubber seal is seamlessly
in contact with the roof.
➤ Attach the roof hood (fig. 3 2, page 4) with three bolts (3,5 x 9,5).
➤ Attach the cover cap (fig. 3 1, page 4) with three bolts (4,2 x 13).
➤ Attach the switch next to the stove.
6.1 Connecting the roof vent electrically
➤ Connect the vent to the battery; see fig. 5, page 5.
Key
No. in
fig. 5, Description
page 5
1 Vent
2 Fuse holder with fuse T4 A 5 x 20 mm
3 Battery
sw Black
ws White
rt Red
7

Using the roof vent

Switching the vent on and off
➤ Turn the vent on and off with the switch (fig. 4 1, page 5).
You can choose between two speeds:
– Setting 1: Fan speed 1 (half power)
– Setting 2: Fan speed 2 (maximum power)
EN
Using the roof vent
17