Lelit William PL72 Mode D'emploi page 10

Grinders Line - William - PL72
04.
Instructions for use
To make a good cup of coffee, you must know how to use your grinder properly
and will need a bit of practice. Follow the instructions carefully. You can also
refer to the Quick start guide where you will find illustrated instructions
10
Note.
is started, to ensure that it works properly.
A
Open the packaging
A.1 Open the box, take out the grinder and remove all the bags and packing
materials. Place the grinder on a flat surface to grant an optimal stability.
Caution.
B
Fill the hopper with coffee beans
B.1 Remove the cover (1).
B.2 Fill the hopper (2) with the chosen coffee beans.
B.3 Place the cover back in its seat.
Caution.
C
Switch the grinder on
Caution.
information plate and that the supply system has an adequate circuit breaker.
C.1 Connect one end of the power socket (a) to the socket on the back of the
appliance and the other end (plug) into the wall socket.
C.2 Turn the grinder on by pressing the on/off switch (5). The stand-by led light
(6) will blink for a short time, the LCC display (9) will show the Lelit logo, the
software version and the grinder icon confirming the turning on.
Note.
programming mode.
It is important to carefully follow these instructions the first time the grinder
The unit weights 6,6 kg.
Never use the grinder without the cover on the hopper.
Ensure that the power supply voltage is the same as that indicated on the
The led light (6) indicates both the ON/OFF mode as well as the