Maintenance And Diagnosis Of Failures; Maintenance; Spare Parts; Failure Diagnosis - Erreka AM600S Manuel De L'installateur

MAINTENANCE AND DIAGNOSIS OF FAILURES

1

MAINTENANCE


Before carrying out any maintenance operation, disconnect the device from the power supply.
1 Frequently check the installation in order to detect
any imbalance or sign of deterioration or wear. Do
not use the device if any repair or adjustment is
necessary.
2

SPARE PARTS


If the device needs repairing, go to an
authorised assistance centre or manufacturer;
never try to repair it yourself.
3

FAILURE DIAGNOSIS

STOP pushbutton enabled (emergency stop):
DL1 and DL3 flash simultaneously every 0.5 seconds
(fast).
30
Installation Guide
2 Check that the operation and safety devices
(photocells or safety strips), as well as their
installation, have not suffered any damage from the
weather or external agents.

Use only original spare parts.
Diagnosis items
F1 Motor fuse (5x20)
AM600S: 2.5A
AM600SM: 4A
AM606S: 6.3A
AM606SM: 10A
F2 Electronic fuse (5x20; 500mA)
F3 FT and AUX24V outputs fuse (5x20; 315mA)
DL1 Gate open
DL2 Radio code programming indicator /
Receiving radio code
DL3 Radio code or operation programming
DL4 Opening relay enabled
DL5 Closing relay enabled
DL6 Opening limit switch contacts closed
DL7 Closing limit switch contacts closed
DL8 Opening safety device contacts closed
DL9 Closing safety device contacts closed
DL10 Pedestrian key command contacts closed
DL11 Total key command contacts closed
DL12 Radio key command
DL13 Encoder signal

Operator working:
intermittently, since the encoder sends the
signal in the form of pulses.

Operator shutdown: DL13 may be on or off,
indistinctly, depending on the position of the
encoder (high pulse or low pulse).
DL14 Power supply
Opening or closing photocell testing error: DL1
and DL3 flash simultaneously every 2 seconds (slow).
DL13 comes on