Safety Notice - INTERSPIRO QS S-Face Mask Mode D'emploi

QS / QS II S-FACE MASK
U S E R M A N U A L
A M B I E N T A I R V E R SI O N - F I R ST B R E AT H V E R SI O N
This product, supplying breathing air to the user, has been tested in accordance with
EN 136 Class 3, and is to be used according local regulations.
Manufacturer:
Interspiro AB
Box 2853, 18728 Täby, Sweden.
1 SAFET Y NOTICE
The product must only be used with an approved Interspiro breathing apparatus:
SpiroGuide/SpiroGuide II, QS/QS II or 90U system.
Only use breathing air according to EN 12021.
If the face mask and/or the self contained breathing apparatus is to be used in
conjunction with other personal protective equipment it is important to ensure that
the additional personal protective equipment is compatible with the face mask and
does not impair the full protection of the respiratory protective device.
Examples of dangers which may require the use of additional personal protective
equipment:
-Liquids, steam or gases which can damage the skin.
-Pollutants absorptive by skin
-Thermal radiation
-Mechanical effects
-Explosive environments.
The product must only be used by personnel in good health and trained in the use
of respiratory protective equipment. Individuals with beards or large sideburns may
not obtain an adequate seal. The face mask must be maintained, serviced and tested
as described in this user manual, Interspiro service manuals and Interspiro test
instructions.
INTERSPIRO IS NOT RESPONSIBLE FOR
COMBINATIONS OF PRODUCTS, UNLESS PUT TO MARKET BY INTERSPIRO
CHANGES OR ADAPTATIONS MADE TO THE PRODUCT BY A THIRD PARTY
6